+44 (0) 114 4000850   |   US toll-free 877-399-1010


In NACE MR0175, is GHSC a qualification or production requirement?

Viewed 3370 Times

Question: Can you confirm our company’s interpretation of the testing described in ANSI/NACE MR0175/ISO 15156-3:2009 Annex B, Section B.8? Our interpretation is that the GHSC testing described in B.8 is for qualification of CRA’s for H2S-service by laboratory testing; this testing in B.8 is qualification testing for including the CRA in the standard and it is not intended to be routine/quality control testing that must be performed on every heat of CRA that is produced at a mill.


Section B.8 defines the additional requirements/changes to SSC testing for GHSC testing. There is no implied limitation on the application of these tests. The type of tests and the frequency of “periodic” testing to confirm the resistance to cracking for quality control purposes is not defined in ANSI/NACE MR0175/ISO 15156-3 and, these tests, if required, shall be agreed between the manufacturer and the purchaser. The subject of production route qualification is covered in Section B.2.3 “Qualification of a defined production route”.

This question is in relation to NACE MR0175/ISO 15156-3 Annex B B.8

Reference: ISO 15156 Maintenance Panel Inquiry #2015-03


With a wealth of experience in the oil and gas industry, we provide independent materials and corrosion consultancy to help companies reduce risk, save money and apply best practice in their oil and gas businesses.

Find out more by getting in touch – you’ll get an answer from a qualified, experienced materials engineer every time.


USA toll-free


US: 877-399-1010 (toll free)
UK: +44(0)1144000850

66 Eldon St
S1 4GT
United Kingdom


Was this answer helpful ? Yes / No