IOGP SAFETY ALERT
PRODUCT-SAFETY RETROFIT NOTICE ISSUED BY ADAMS FOR MAK AUTOMATED FLANGED VALVES 3″, 4″, 6″, 8″ AND 12″/600#
|Incident Date: — Time: —|
|Type of Activity: —|
|Type of Injury: —|
|A product-safety retrofit notice was issued by ADAMS Armaturen GMBH ON 23 December 2016.
The letter of notification can be downloaded here.
The following text is copied from the notification.
This has the potential to cause personal injury or damage to the surrounding area.
The Thrust Bearing is marked as a wearing part in the part list.
We strongly advise that you immediately inspect the Thrust Bearing with a depressurized valve to check for exposed wear, and contact us immediately for further action!
To address the issue, we will provide you with a modified Thrust Bearing and clamping device that will extend the life of the Thrust Bearing and mitigate the risk of premature failure.
Please confirm that you have received this information and that the information has been forwarded to the relevant person in your plant.
Please use the following information to contact us:
Please note that ADAMS takes great pride in its Quality promise and that is why we are proactively informing you about these findings.”
safety alert number: 290
Whilst every effort has been made to ensure the accuracy of the information contained in this publication, neither the IOGP nor any of its members past present or future warrants its accuracy or will, regardless of its or their negligence, assume liability for any foreseeable or unforeseeable use made thereof, which liability is hereby excluded. Consequently, such use is at the recipient’s own risk on the basis that any use by the recipient constitutes agreement to the terms of this disclaimer. The recipient is obliged to inform any subsequent recipient of such terms.